The Cloverfield

WIFI Configurable Animation Que With any Phone/Tablet with Easy push button control with 3 brightness levels

4 Unique interactive animations controlled by the motion of your head

Ready made and available to ship ASAP!

This mask is based on a half face Airsoft chin mask. It is supported on your face/head via an adjustable, dual elastic strap. Its covered in 711 Addressable SUPER BRIGHT Full Color LED pixels. The front is molded with Fosshape, a soft white thermoplastic, to help with colour diffusion.The piece is intended for an adult face.The mask has a tiny controller module that is fixed with velcro to the elastic strap at the rear of the mask.

There is a single push-button on the rear that allows you to toggle between 3 brightness levels & to configure the animation que using your phone/tablet

The controller is powered by a standard USB plug which needs to run of a Mobile Power Bank(see power requirements below)

Power Requirements:
You must BYO a battery because I can not ship them in the mail.This model has been tested and is recommended BUT any power bank with a 2A output port will work just fine

Cygnett – https://www.cygnett.com/products/chargeup-digital-10-000-black-grey-powerbank

Animation + Brightness control modes:

This model is pre-loaded with 39 animation sequences that run for 10 seconds each (this is the default Que)4 of which are uniquely interactive by the motion of your head.  

Note that because this mask is equipped with a 6 Axis motion sensor, it will take 2 seconds to boot up after you flick the power switch. If you want to have smooth control of the 4 interactive animations, make sure you hold your head still for the 2 seconds it takes to boot so the IMU has time to calibrate

You can also configure the mask to run ANY animation sequence for any duration of time per animation, via a web interface.

Instructions for configuring your own animation que/playlist are can be found here

Purchase Price: $800 AUD

To Purchase, please contact me via email or Instagram DM