First off we have the lovely pink lady from many a Coco Poco Loco party:
I was asked to work my magic and here it is:
I put a strip in the head, onto the bust, all the way up the spine and along the lower parts of the front facing legs. The whole thing uses about 68 LEDs from a WS2812b strip. I used a NodeMCU for this, just for shits and giggles and to see if i could get it to drive WS2812B strips. I used THIS modified NeoPixel driver with the NodeMCU module running at 160Mhz. Note you must use the UART driven library on Pin 4. Here is another example:
The Pink Lady is getting sexier for the #cocopocoloco #burningmanaustralia #burningseed #artcar IF they like it. The #ledstrips inside are #apa102 from @tyrialight and they are being driven by a #nodemcu A video posted by Elec Dash Tron Dot Org (@wow_elec_tron) on
Next up is Jords Disco Shoulder Pads
![]() |
Disco Pads? |
I used a Arduino Nano for this along side a WS2812B LED Strip. The results is hillarious:
My best piece to date in my opinion:
Here are some #discopads please enjoy them #burningmanaustralia #burningseed #ledwearables #arduino #apa102 #ledstrip A video posted by Elec Dash Tron Dot Org (@wow_elec_tron) on